AVR-JTAG-USB-A (OPTOISOLATED USB JTAG DONGLE)
      AVR-JTAG-USB-A (OPTOISOLATED USB JTAG DONGLE)

      AVR-JTAG-USB-A (OPTOISOLATED USB JTAG DONGLE)

      AVR-JTAG-USB-A
      23,94 €

      19.95 € bez DPH

      AVR-JTAG-USB-A (OPTOISOLATED USB JTAG DONGLE)

      Množstvo:
      OUT OF STOCK

      AVR-JTAG-USB-A (OPTOISOLATED USB JTAG DONGLE)

      OPTOISOLATED USB JTAG DONGLE FOR PROGRAMMING AND EMULATION

      FEATURES

      • Programs and debugs AVR flash microcontrollers that have JTAG and are supported by Atmel JTAG ICE mkI, AVR-JTAG-USB is a complete analog of Atmel JTAG ICE mkI (AVR Studio thinks it works with original ICE). Note that this is not Atmel JTAG ICE mkII. If you want to work with the newer devices or with debug wire this JTAG will NOT do the job. This design does not support newer devices like ATmega644, ATmega640, ATmega1280/1281/2560/2561, ATmega645/6450/649/6490 and so on
      • Optoisolated, so you can debug target boards directly connected to mains 120/220VAC (take care when working with high voltages!)
      • No need for external power supply before the optocoupler it as takes power from USB port
      • Works with targets Vcc 3.0-5.0V
      • Uses Atmel's 2x5 pin JTAG connector layout (DIFFERENT FROM ICSP CONNECTOR layout!)
      • Works with AVR STUDIO for programming, real time emulation, debugging, step by step program execution, breakpoints, memory dump etc everything all high priced emulators do
      • Full emulation of all analog and digital functions, full JTAG programming support
      • Upgradable via AVR STUDIO
      • Requires a USB-A male type cable, i.e. you should have USB-A male to USB-A male cable to connect it to your computer
      • Dimensions 50x40 mm (2x1.6") + 20 cm (8") cable

      DOCUMENTS

      HARDWARE

      • AVR-JTAG connector (top view)
      • Please note that AVR-USB-JTAG needs power from the target, which means that PIN.4 and PIN.7 of the JTAG connector should be wired to the target board VCC! This is a requirement due to the optoisolation circuit

      SOFTWARE

      • AVR STUDIO for programming and emulation.
        Please note that ATMEL does not support this product in AVR Studio 5 and ATMEL Studio 6!IMPORTANT NOTE: AVR Studio 4.13 has a bug and the fuses are not read correctly. On our request to Atmel support they confirmed the bug and promised to fix the bug in "AVR Studio 4.13 SP2 JTAGICE Fix"available from http://www.atmel.no/beta_ware/
      • FT232 drivers for your OS download and install to may work with AVR-JTAG-USB via the virtual COM port and AVR Studio
      • For GNU/Linux you can also usehttp://avarice.sourceforge.net/ Our customer Mr. Aris (thank you) reported success using the avarice software. A typical command line for AVR-USB-JTAG and atmega32 controller would be: avarice -1 -j ⁄dev⁄ttyUSB0 -e -P atmega32 -f mycode.hex -p -v
      OLIMEX
      AVR-JTAG-USB-A

      Špecifické referencie

      Stiahnuť

      AVR-JTAG-USB-A (OPTOISOLATED USB JTAG DONGLE)

      AVR-JTAG-USB-A (OPTOISOLATED USB JTAG DONGLE)

      23,94 €

      19.95 € bez DPH